Product Center
TS-1050S Water-Based Ink, Designed for LED Digital Tubes
Detailed Introduction
The TS-1050S water-based ink effectively addresses customers' needs for acetone wipe resistance, ease of cleaning, and the absence of irritating odors in the printing of LED digital tubes. This ink is suitable for a variety of materials, including PS, HIPS, PC, PMMA, ABS, PVC, and glass, with particularly good compatibility with porcelain white PPE (polyphenylene ether).
1. Product Features:
- Low VOC, mildly toxic, and environmentally friendly.
- Can be diluted with uncontaminated tap water or deionized water (if halogen requirements are present).
- Excellent adhesion to plastic substrates.
- Good drying properties under drying conditions.
- Relatively long working time; using the TS1050-01 curing agent allows for a working time of up to 6 hours.
- Coating exhibits good hardness, flexibility, and impact resistance.
- Complies with ROHS usage standards.
2. Safety Guidelines:
a) This product is industrial-grade; avoid direct contact with skin, eyes, and inhalation.
b) Use this product in a well-ventilated area.
c) If splashed in mouth, nose, eyes, or ears, rinse thoroughly with plenty of water or seek medical assistance.
d) Individuals allergic to this product should apply a layer of skin protective cream or wear impermeable gloves before use.
3. Storage, Transportation, and Packaging:
a) Store indoors at temperatures between 15-30°C, avoiding direct sunlight.
b) Prevent freezing and exposure to direct sunlight during transportation and storage, and avoid extreme low and high temperatures.
Specifications:
- Appearance: Light yellow transparent liquid
- Viscosity: 10,000-15,000 PCS (at 25°C)
- Active Ingredients: 35% ±2
- Solvent: Ether ester and amine neutralizer
- pH Value: 8.0 ± 0.5
- Drying Conditions: Bake at 130°C for 30 minutes
- VOC Value: 18 ± 2
- Water-Based Curing Agent Ratio: 10%-20%
